Table of Contents
Advertisement
5.1.3
LUBRICATING
1. Use the maintenance record provided in section
5.3 to keep a record of all scheduled mainte-
nance.
2. Grease both universal joints on PTO drive shaft
every 8 to 10 hours (see figure 3).
3. Grease flange bearings on the 2 speed gearbox
drive shaft every 8 to 10 hours.
4. Grease flange bearings (3) on the opening door
system monthly
5. Planetary right angle gearbox : A grease line,
grease fitting located underneath the tub, is
intended to grease the planetary tower top bear-
ing (figure 2). It must be greased once a year
with ten pumps of grease. This should be done
in conjunction with oil changes.
Fig. 3
Lubrication
14
Fig. 2
Greasing planetary tower top bearing
Advertisement
Table of Contents
