Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Kharma EXQ-CS-3.0
Summary of Contents for Kharma EXQ-CS-3.0
- Page 1 EXQ-CS-3.0 Manual...
- Page 2 If there is damage, immediately call your dealer or the trucking firm that made the delivery. Do not delay in reporting the damage. Please store the cartons for future use. Your EXQ-CS-3.0 is a high-performance 2,5-way system, using ultra high quality drivers.
- Page 3 Connection At the rear of your EXQ-CS-3.0 you will find the high-end Kharma Connection Terminal. Be sure you use the same brand, type and length of speaker cable on each channel. Mixing different types and/or lengths of speaker cable can upset the precise timing and balance of your speaker.
- Page 4 Important 1) Switch SINGLE WIRE / SINGLE AMP - switch position to the left 2) Switch BI-WIRE / BI-AMP - switch to the right 3) To preserve contact-quality, use switch only in non music/current situation 4) CAUTION! Do not choose SINGLE WIRE / SINGLE AMP in a bi-wire or bi-amp situation...
- Page 5 The speakers will normally work well straight out and not angled toward the listener for accurate sound staging. The wide dispersion of the EXQ-CS-3.0 makes this possible. Many have found the best room position to be along an undraped longer wall, with the speakers as far apart as the listener is for them.
- Page 6 Burn-In Your EXQ-CS-3.0 system needs quite a bit of playing time to reach maximum result. The use of a Burn-in test-CD is recommended to speed up this process. With a “burn-in” test CD, like the XLO or Sheffield-lab CD, burn-in time is reduced to approximately 50 hours.
- Page 7 System 2.5-way RMS-power (W) Dynamic power (W) Frequency range (Hz) 22-90k Efficiency (dB/W/m) Maximum SPL (dB) Nom. Impedance (Ohm) Connection mid/high Kharma Connection Terminal Connection low Freq. Kharma Connection Terminal Dimensions: Height (in/cm) 45,2/114,8 Depth (in/cm) 21,6/27,5-55/69,8 Width (in/cm) 15,7/39,8...
- Page 8 In case of malfunction the customer has to present the Kharma product in its original packing to an authorized dealer. If qualified service appears inevitable, the dealer will ship the product to an appointed service station or to the factory, depending on the required service.
Need help?
Do you have a question about the EXQ-CS-3.0 and is the answer not in the manual?
Questions and answers