Related Manuals for PowerFleet Vista
Summary of Contents for PowerFleet Vista
- Page 1 PowerFleet V-AI12 Quick Installation Guide Page 1 of 15 Proprietary & Confidential support@powerfleet.com...
- Page 2 Thank you! We are excited to introduce you to your new V-AI12 Connected Dashcam. With Vista you can harness the power of video to connect your fleet vehicles, help protect your drivers on the road and save lives. Have a safe trip,...
- Page 3 Explore Vista • CAPTURE THE DRIVE - Simultaneously capture the road and cabin to detect distracted driving and risky driving events. • LIVE VIDEO - View live video from your camera using any device. • AI DRIVER ALERTS - Provide visual and audio alerts of distracted and risky driving events.
- Page 4 What’s in the box V-AI12 features ROAD-FACING CAMERA Page 4 of 15 Proprietary & Confidential support@powerfleet.com...
- Page 5 CABIN-FACING CAMERA Page 5 of 15 Proprietary & Confidential support@powerfleet.com...
- Page 6 Place the camera as high as possible on the driver side of the vehicle. • Remove the 3M adhesive tape cover, and mount the camera to the windshield. WARNING: Prior to installation, please review safety warnings and guidelines at powerfleet.com/disclaimers Page 6 of 15 Proprietary & Confidential...
- Page 7 OEM circuit (constant or ignition switched, #2 in picture right) and another fuse slot for the new circuit for the dashcam device (#1 in picture right). Page 7 of 15 Proprietary & Confidential support@powerfleet.com...
- Page 8 6. Plug the power cable to the dashcam. Start your vehicle to test if the dashcam powers up. Once you tested your dashcam, run the power cable along the headliner of the car along the A-Pillar to the power source for a clean installation. That’s it. You’ve successfully installed your dashcam! Page 8 of 15 Proprietary & Confidential support@powerfleet.com...
- Page 9 • Connect the camera to a power source (page 12). • The camera will turn on automatically. • To unlock the camera touch screen, enter a default PIN number 3333 (page 13). Page 9 of 15 Proprietary & Confidential support@powerfleet.com...
- Page 10 12V power source (see page 8). Access the V-AI12 Settings menu • Press the camera touchscreen. • Enter the default PIN number 3333. • The camera is now unlocked, and the Settings menu is now accessible. Page 10 of 15 Proprietary & Confidential support@powerfleet.com...
-
Page 11: Settings Menu
Change Driver PIN • • Text Overlay Calibration • • Distracted Driver Notifications Brightness • • In-Cabin Recording Serial Number • • Driver Position Format SD Card • Date Format • Power Off Page 11 of 15 Proprietary & Confidential support@powerfleet.com... - Page 12 All the recorded videos on the SD card will be displayed in a list, sorted by date and time. • Use the arrow buttons to scroll through the list. • Select the video you would like to view and then click the ‘Play’ button. Page 12 of 15 Proprietary & Confidential support@powerfleet.com...
- Page 13 In addition, the camera will deploy a sound alert. *Please note that the Vista camera is a driver aid only and is not a substitute for a safe, conscientious driver. The camera cannot compensate for a driver that is distracted, inattentive, or impaired by fatigue, drugs, or alcohol.
- Page 14 Turn on your car vehicle’s ignition switch. • After about a minute you should see the Vista’s IMEI* number in the list of devices with a green icon next to it, indicating the camera is online. *The IMEI number can be found on the sticker on the camera itself or on the back of the carton box the camera arrived in.
-
Page 15: Compliance Statements
Any changes or modifications not expressly approved by Vista could void user’s authority to operate the equipment. Caution: Exposure to radio frequency radiation. To comply with FCC RF exposure compliance requirements, for mobile configurations, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons.
Need help?
Do you have a question about the Vista and is the answer not in the manual?
Questions and answers