Maintenance Instructions; If You Need Assistance - Whirlpool CGm2793BQ Installation Instructions Manual

Commercial dryer gas or electric
Hide thumbs Also See for CGm2793BQ:
Table of Contents

Advertisement

Available languages

Available languages

MAINTENANCE INSTRUCTIONS

Clean lint screen before and after each cycle.
Removing accumulated lint:
From inside the dryer cabinet:
Lint should be removed every 2 years or more often,
depending on dryer usage. Cleaning should be done
by a qualified person.
From the exhaust vent:
Lint should be removed every 2 years, or more often,
depending on dryer usage.
Keep area around dryer clear and free from combustible
materials, gasoline, and other flammable vapors and liquids.
Keep dryer area clear and free from items that would
obstruct the flow of combustion and ventilation air.

IF YOU NEED ASSISTANCE

Contact your authorized Commercial Laundry distributor. To locate your authorized Commercial Laundry distributor, or for web
inquiries, visit www.WhirlpoolCommercialLaundry.com.
If you cannot locate your distributor, the Commercial Laundry Support Center will answer any questions about operating or
maintaining your dryer not covered in the Installation Instructions.
Just dial 1-800 NO BELTS (1-800-662-3587) — the call is toll free.
When you call, you will need the dryer model number and serial number. Both numbers can be found on the serial-rating plate
located in the dryer door opening.
26
If dryer does not operate, check the following:
Electrical supply is connected.
Circuit breaker is not tripped or house fuse is not blown.
Door is closed.
Controls are set in a running or "on" position.
START button has been pushed firmly.
For gas dryers, check that gas supply shut-off valves are set
in open position.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cgm2743bqCem2743bqCem2793bq

Table of Contents