48V MAX* | 4.0 Ah | 20-INCH | LED LIGHTS OPERATOR’S MANUAL Model 24V-X2-20SB-RM A Division of Snow Joe , LLC ® Form No. SJ-24V-X2-20SB-RM-880E-MR3-V2 IMPORTANT! WARNING! Always disengage the switch lever and remove the battery packs before making any adjustments, Safety Instructions inspecting, servicing, changing accessories, cleaning the snow blower, or when any other dangerous conditions are present.
12. Do not modify or attempt to repair the appliance or the WARNING! If the snow blower strikes any object, battery packs (as applicable) except as indicated in the follow these steps: instructions for use and care. i) Stop the snow blower. Remove the batteries. Battery &...
Page 4
® ® even if the housing of the battery pack appears to be 1-866-SNOWJOE (1-866-766-9563) for assistance. undamaged. The battery cells inside the battery may have • Battery chemicals cause serious burns – Never let a suffered serious damage. In such instances, please read damaged battery pack contact the skin, eyes or mouth.
+ Sun Joe ® ® ® customer service center at 1-866-SNOWJOE 5. Do not keep the battery charger in places where the (1-866-766-9563). temperature is liable to reach over 105°F (40.5°C). In particular, do not leave the battery charger in a car that 3.
® ® ® stopped rotating. Sun Joe customer service center at 1-866-SNOWJOE ® iii) Always use a clean-out tool, not your hands. (1-866-766-9563) for assistance. • Noise control – When using the snow blower, respect the local laws and regulations regarding noise control and environmental protection.
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand WARNING! Do not expose the and follow all instructions in the unit to rain or wet conditions.
Page 8
Know Your Cordless Snow Blower Read the owner’s manual and safety rules carefully before operating your cordless snow blower. Compare the illustration below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
2. Inspect the product carefully to make sure no breakage or damage occurred during shipping. If you find damaged or missing parts, DO NOT return the unit to the store. Please call the Snow Joe + Sun Joe customer service center at ® ® 1-866-SNOWJOE (1-866-766-9563).
+ Sun Joe customer service center at ® ® 1-866-SNOWJOE (1-866-766-9563) for assistance. 6. When charging is complete, remove the batteries from the charger by pressing the push lock buttons and sliding the batteries backward to unlock them from the charger (Fig.
Assembly Fig. 4 Assembling the handles 1. Mount the middle handle frame onto the lower handle frame and align the holes. Join the handle frames with 2 sets of handle frame latches + threaded connectors as shown (Fig. 5). NOTE: When threading the connector, make sure the latches are flipped down in the unlocked position as shown.
Discharge Chute Assembly 3. Follow the same instructions above to fit and secure the upper handle frame onto the middle handle frame with the 1. Slide the discharge chute assembly into position, as other latch + threaded connector set (Fig. 7). shown.
Page 13
Operation Chute Crank Rod Assembly 1. Slide the chute crank rod through the hole on the chute WARNING! rod retainer located on the middle handle frame (Fig. 12). Keep the area to be cleared free of stones, toys or other foreign objects that the rotor blades might pick Fig.
Operating Tips Pattern B: If the snow can only be thrown to one side of the area to be cleared, start on the opposite side. WARNING! Foreign objects, such as rocks, broken glass, nails, wire, or string, can be picked up and thrown by Fig.
Snow Joe 24V-X2-20SB-RM cordless snow blower, please ® clockwise to move the discharge chute to the left and visit snowjoe.com or contact the Snow Joe + Sun Joe ® ® counterclockwise to move the chute to the right (Fig. 19).
Page 16
You can purchase a replacement auger blade (Model 24V-X2-20SB-SCRPR) and other genuine replacement parts 24V-X2-20SB-AUGER) and other genuine replacement parts by visiting us online at snowjoe.com or calling our toll-free by visiting us online at snowjoe.com or calling our toll-free customer service helpline at 1-866-SNOWJOE customer service helpline at 1-866-SNOWJOE (1-866-766-9563).
Snow Joe + Sun Joe ® ® ® customer service center at 1-866-SNOWJOE Metal plate (1-866-766-9563) for assistance. 3. Clean the snow blower before storing or transporting. Be sure to secure the unit while transporting. Fig. 25 4.
Service + Support from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician If your Snow Joe 24V-X2-20SB-RM cordless snow blower ® for help. requires service or maintenance, please call the Snow Joe ®...
Page 19
Optional Accessories WARNING! ALWAYS use only authorized Snow Joe + Sun Joe replacement parts and accessories. NEVER use ® ® replacement parts or accessories that are not intended for use with this cordless snow blower. Contact Snow Joe + Sun Joe ®...
Page 20
NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at snowjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ®...
Page 21
@snowjoe. • Wearing parts like belts, augers, chains and tines are not covered under this warranty. Wearing parts can be EXPORTS: purchased at snowjoe.com or by calling 1-866-SNOWJOE Customers who have purchased Snow Joe + Sun Joe ®...
Need help?
Do you have a question about the 24V-X2-20SB-RM and is the answer not in the manual?
Questions and answers