REMO Electronics BAS-2301 WiFi Manual

Wi-Fi Flat Antenna
REMO BAS-2301 WiFi
USER MANUAL
Thank you for choosing our Flat Antenna REMO BAS-2301 WiFi! It has been developed
by a team of engineers determined to continue with the tradition of excellence
and innovation of REMO-Electronics products. Wi-Fi Flat Antenna REMO BAS-2301 WiFi
is made of high-quality materials in accordance with thoroughly detailed design.
BAS-2301 WiFi can be installed on any mast with a diameter up to 50 mm or
wall bracket. The antenna is connected to the WiFi router or WiFi adapter via cable
RG-58A/U with RP-SMA connector.
Wi-Fi Flat Antenna REMO BAS-2301 WiFi improves the signal strength, as well
as steadiness and accuracy of data transmission. The antenna REMO BAS-2301 WiFi
is compatible with Wi-Fi adapters and Wi-Fi routers operating in the frequency
range 2.4 Ghz (IEEE802.11b/g/n), with RP-SMA connector.
Electrical Data
Frequency: 2400-2500 MHz
Gain: 15 dBi
VSWR: <1.5:1
Polarization: Vertical
Horizontal Beamwidth: 40°
Vertical Beamwidth: 35°
Nominal Impedance: 50 Ohms
F/B Ratio: >20 dB
Max Input Power: 100 W
Lightning Protection: DC Ground
Step 1
Step 2
Mechanical Data
Connector: SMA-Male
Dimensions: 9.5x9.5x3.3in
Weight: no more than 2.2 lb
Re ector Material: Aluminum Alloy
Radome Material: Weatherproof ABS
Mounting Method: Mast or Wall Bracket
Mast Size: Ø20-Ø50mm
Rated Wind Velocity: 210km/h
Operating temperature: -40~+65C
Step 3
Step 4
Step 5
Step 6