Canon ZR45 MC Instruction Manual page 98

Notes:
E
When using an external microphone \ Connect it to the microphone
•
When using the DM-50 microphone \ Make sure nothing is connected
When using the built-in microphone \ Make sure nothing is connected
• When you add sound using the built-in microphone make sure not to
connect any cables to the MIC terminal.
• To use your TV to monitor video, connect the S-video terminal (
AV terminal (use only the video plug) to your TV. You can monitor the sound
with headphones only when using the S-video terminal (
Preparations
Turn the camcorder' s POWER switch to PLAY (VCR) and move the camcorder' s
TAPE/CARD switch to TAPE. Load a recorded cassette.
• Make sure the REC/SAVE tab on the cassette has been slid to REC (closed
position).
Dubbing
Do not connect/disconnect any cables to/from the camcorder when dubbing audio
or preparing to dub audio.
PLAY
+
TAPE
(VCR)
( 40)
1. Open the menu and select VCR SET UP.
2. Select AUDIO DUB.
98
VCR SET UP
terminal.
to the microphone terminal.
to either the microphone
terminal or the accessory shoe.
AUDIO DUB.••AUDIO IN
35) or the
34).
ZERO SET
SEARCH
MEMORY SELECT
AUDIO
REW PLAY FF
DUB.
AV
– / STOP
+ /
INSERT
× 2
PAUSE SLOW
REMOTE SET