Canon ZR45 MC Instruction Manual page 26

Magnifies the camcorder' s zoom range by up to 20 × in TAPE CAMERA mode.
E
The zoom control continues to work as usual. You can freely zoom in and out
between 1× and 360× magnification — the camcorder automatically switches
between optical zooming (up to 18×) and digital zooming (18× to 72× or 18× to
360×).
+
TAPE CAMERA
( 40)
To change the digital zoom, open the menu and select CAM.SET UP.
Then select D.ZOOM, set it to OFF or 360× and close the menu.
Notes:
• When zooming, as a rule, keep at least 3 ft 3
subject. However when the zoom is at the wide-angle position, you can focus
on a subject as close as
• Image resolution is slightly lower when the magnification is greater than
22×/18×.
• You cannot use digital zoom in the Night recording program.
• You cannot use digital zoom when the multi-image screen is set. The display
becomes " – – – " .
• The zoom indicator appears for 4 seconds. When the digital zoom is set to
88×/72×, the zoom indicator extends (light blue). When the digital zoom is set
to 440×/360× zoom, the zoom indicator extends again (a darker blue).
26
,
+
CARD CAMERA
CAM.SET UP
3 / in (1 cm).
8
×
72
D.ZOOM••••••
3 / in (1 m) between you and your
8