Advertisement
Quick Links
NUTS AND BOLTS CONTENT IN BOX B
x6
x4
M 10x30
M 8x20
x6
x4
10
8
WEAR GLOVES
DURING ASSEMBLY
x13
x4
M 8x25
Mudguard plates
x4
x1
Bracket
8
x2
x4
10
M 6x12
Manufactured on behalf of
LIMITED
Maypole Ltd, Birmingham UK
www.maypole.ltd.uk
sales@maypoleltd.co.uk
NOTE: TIGHTEN FIXINGS TO TORQUES
PRESCRIBED IN THE LIST OF TOOLS
SY150
MP6815
NUTS AND
BOLTS
x1
(M5)
(M6)
(M8)
(M10)
Advertisement
Related Manuals for Erde SY150
Summary of Contents for Erde SY150
- Page 1 SY150 MP6815 NUTS AND BOLTS NUTS AND BOLTS CONTENT IN BOX B (M5) (M6) M 10x30 M 8x20 M 8x25 Mudguard plates M 6x12 (M8) (M10) Bracket Manufactured on behalf of WEAR GLOVES DURING ASSEMBLY LIMITED Maypole Ltd, Birmingham UK www.maypole.ltd.uk...
- Page 2 REMOVE PRE-FITTED BOLT UNSCREW AS FAR AS POSSIBLE WITHOUT REMOVING TO DRAW BAR INSERT BOLT TO DRAW BAR CLIP THE WIRES TO THE BEAM D4 FULLY TIGHTEN ALL FIXINGS IN SECTIONS A-C...
- Page 3 CAREFULLY TURN THE TRAILER OVER SO WHEELS ARE ON THE GROUND FULLY TIGHTEN THE WHEEL BOLTS DO NOT TIGHTEN NUTS AND BOLTS IN SECTION H-I UNTIL INSTRUCTED TO DO SO IN SECTION K...
- Page 4 90º BRACKET FIT 90º BRACKETS INSIDE THE MUDGUARD CLOSE AND SECURE TAILGATE THEN FULLY TIGHTEN ALL NUTS AND BOLTS IN SECTION G-I Road trailers must be inspected prior to use to ensure they are of a road worthy • Wheels After assembly and again condition;...
Need help?
Do you have a question about the SY150 and is the answer not in the manual?
Questions and answers