Audio Output - Canon XL H1S Instruction Manual

Audio Output

Selecting the Audio Channel
You can select the channel for audio signal output from the
terminals.
Repeatedly press the AUDIO OUTPUT CH
button to change the audio channel.
• Pressing the button will cycle between the audio
channels in the following order: CH1/CH2
CH1/CH1 CH2/CH2
CH1/CH2.
• During playback of a tape recorded with 4-channel
audio (using another device) or while recording
external video with 4-channel audio from the HDV/DV
terminal, the output channels will be: CH1·3/CH2·4
CH1·3/CH1·3 CH2·4/CH2·4
Selecting the Audio Output Level
You can boost the level of the audio output signal from the
2 Vrms (+6 dB).
MENU
AUDIO SETUP
( 33)
Open the menu and select [AUDIO SETUP]. Select [OUTPUT LEVEL], select a setting
option and close the menu.
Selecting the Audio Monitor
MENU
AUDIO SETUP
( 33)
Open the menu and select [AUDIO SETUP]. Select [AUD.M.SET], select a setting option
and close the menu.
• You can also select the audio monitor using the wireless controller.
• If you selected [MIX/VAR.], adjust the mix balance with the [MIX BALANCE] setting or using the MIX
BALANCE buttons on the wireless controller.
90
ALL CH/ALL CH
ALL CH/ALL CH.
OUTPUT LEVEL•••1Vrms
AUD.M.SET•••CH
CH1/CH2 and the
CH1/CH2 terminals from 1 Vrms to
1/2
(headphone)