Using The Wind Screen - Canon XL H1 Instruction Manual

Using the Wind Screen

With the supplied microphone (only), you can reduce the sound of wind recorded from the front
microphone.
MENU
AUDIO SETUP WIND SCREEN•••ON
( 31)
Open the menu and select [AUDIO SETUP]. Select [WIND SCREEN], select a setting
option and close the menu.
Recording on Channels 1 and 2
Select the audio input from FRONT MIC (supplied microphone), AUDIO1 (RCA terminals) or REAR
(XLR terminals). Refer also to the Audio Block Diagram ( 157).
When Using the Front Microphone
Set the INPUT SELECT switch to FRONT MIC.
• You can select the microphone setting with the STEREO/MONO switch on the microphone itself. In the
MONO position, the same monaural audio signal will be recorded on channels 1 and 2.
• If necessary, turn on the microphone attenuator (20 dB) by setting the FRONT MIC ATT. switch to ATT.
When Connecting to the RCA terminals of AUDIO1 (Line-in Recording)
1. Connect the device to the RCA terminals of AUDIO1.
2. Set the INPUT SELECT switch to AUDIO1.
64