Table of Contents
Advertisement
Using the HDV/DV Terminal
3
• When connecting the camcorder to a monitor TV that supports DV, you may need to carry out a procedure
on the TV to recognize the camera. Refer to the instruction manual of the TV or monitor.
• If necessary, turn on the DV conversion and select whether to convert a tape recorded in HD to SD with the
following procedure.
Open the menu and select [SIGNAL SETUP]. Select [HD DOWN-CONV], select a setting
option and close the menu.
4
Using the S-VIDEO or VIDEO Terminal
If connecting to a TV, set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE.
Refer also to the instruction manual of the TV or VCR.
Open the terminal cover
102
DV Cable
(commercially available)
Stereo Cable (supplied)
Signal flow
Signal flow
S-Video Cable
(commercially available)
4-pin
6-pin
INPUT
VIDEO
L
AUDIO
R
S (S1)-VIDEO
Advertisement
Table of Contents
