Bridge Cooking Zone - Frigidaire Professional FPEF3081KF Use & Care Manual

Frigidaire professional fpef3081kf: user guide
Hide thumbs Also See for Professional FPEF3081KF:
Table of Contents

Advertisement

SETTING SURFACE CONTROLS

Bridge cooking zone

The 3 left cooking zones may also be used together as a
single cooking zone when setting for the Bridge feature.
The space wise bridge cooking zone is marked on your
cooktop. This feature provides the flexibility to cook with
larger oblong cookware.
Indicator lights located on the backguard for the bridge
show which portions of the bridge element are set to heat.
The
symbol indicates only the left front element will
heat (Fig. 1). The
symbol indicates both the left front
and left middle elements will heat together (Fig. 2).
The
indicates that all 3 elements (left front, middle and
rear) will heat together (Fig. 3).
To operate one or more of the bridge radiant
surface elements:
Step
1. Place correctly sized cookware on
the bridge radiant surface cooking zone.
2. Press and hold the on-off
for the bridge element position
until a beep is heard.
3. Press the desired element size
(once for left front, twice for
left front and left middle,
3 times for left front, middle and
rear).
4. Press lo, med (5.0) or hi.
Each touch of the lo or hi pad will
decrease or increase the power
level by 1/2 from 9.5 through 3.0.
Simmer power levels between
3.0 and 1.2 will decrease or increase
by .2 increments. lo is the lowest
power level available.
5. Once cooking has
completed, press on-off.
See the Suggested power level settings table
(provided in the instructions for the single radiant
elements). The size and type of utensil used, and the
amount and type of food being cooked will influence the
setting needed for best cooking results.
elements that will
heat is shaded
indicator light
Fig. 1 (left front)
Press
Radiant surface elements may appear to have cooled
after they have been turned off. The glass surface may
still be hot and burns may occur if the glass surface is
touched before it has cooled sufficiently.
Do not place flammable items such as plastic salt and
pepper shakers, spoon holders or plastic wrappings on
top of the range when it is in use. These items could melt
or ignite. Potholders, towels or wooden spoons could
catch fire if placed too close to the surface elements.
,
,
The HE (hot element) message will appear in the display
windows once a heating element is turned OFF and will
remain ON until the heating surface area or areas have
cooled sufficiently.
Do not allow aluminum foil, or ANY material that
can melt to make contact with the ceramic glass
cooktop. If these items melt on the cooktop they will
damage the ceramic cooktop.
If all 3 bridge zones are in use with the bridge feature
and you need the left rear as a single element for a
different reason, change the bridge size to
bridge
bridge
elements that will
heat is shaded
indicator light
Fig. 2 (left front &
middle)
CAUTION
IMPORTANT
NOTES
and then set the left rear position independently.
bridge
elements that will
heat is shaded
indicator light
Fig.3 (left front,
middle & rear)
or
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Electric range316902304

Table of Contents