Page 1
SINGLE HANDLE KITCHEN FAUCET Model MNO351CP, MNO351SS, MNO351ORB CAUTION-TIPS FOR REMOVAL OF OLD FAUCET: Always turn off water supply before removing existing faucet or replacing any part of the faucet. Open the faucet handle to relieve water pressure and ensure that water is completely shut off.
Page 2
Standard Installation Shut off water supplies. (If installing the faucet with the escutcheon, begin with step 2.) Insert faucet body through the hole in sink. Install plastic washer (1) and metal washer (2) onto the threaded mounting shank. Thread nut (3) onto mounting shank. Lock nut into position by tightening screws (4).
Page 3
Screw quick connector to the free end of hose. Align block (1) and tabs on quick connect. Push quick connect housing firmly upward and snap onto receiving block. Pull down moderately to ensure connection has been made. If it is necessary to remove quick connect, squeeze tabs on hose between index finger and thumb, then pull down to disconnect.
Page 4
Maintenance: If faucet leaks underneath handle or water does not completely shut off: Replace cartridge. * Specify Finish RP60071 O-ring RP70551 RP13454* Hose Handle RP70380 Wearable ring RP50002 Set Screw MIRXC3811901 Sprayhead RP50095 RP80237* Screw RP70550 Bonnet MIR20052 Cartridge RP80536* Escutcheon RP70421 Block...
Need help?
Do you have a question about the MNO351CP and is the answer not in the manual?
Questions and answers