Electrolux EKK925A0OX User Manual page 21

2. Pull the rear end of the shelf support
away from the side wall and remove
it.
1
2
Install the shelf supports in the opposite
sequence.
12.4 Catalytic cleaning
CAUTION!
Do not clean the catalytic
surface with oven sprays,
abrasive cleaning agents,
soap or other cleaning
agents. This will damage the
catalytic surface.
Spots or discolouration of
the catalytic surface have no
effect on catalytic properties.
WARNING!
Keep children away when
you clean the oven at a high
temperature. The oven
surface becomes very hot
and there is a risk of burns.
Before activating the
catalytic cleaning remove all
the accessories from the
oven.
The walls with a catalytic coating are
self-cleaning. They absorb fat which
collects on the walls while the appliance
operates.
To support the self-cleaning procedure,
heat the empty oven on a regular basis.
1. Clean the oven floor with warm water
and washing up liquid, then dry it.
2. Set the function
3. Set the maximum temperature and
let oven operate for 1 hour.
4. When the appliance is cool, clean it
with a soft and moist sponge.
.
12.5 Cleaning the oven door
The oven door has two panels of glass
installed one behind the other. To make
the cleaning easier remove the oven
door.
WARNING!
The oven door can close if
you try to remove the
internal panel of glass when
the door is still assembled.
Do not loosen the screws.
1. Open the door fully.
2. Lift and turn the levers on the two
hinges till they stop (until you reach
the pins).
ENGLISH 21