Adjusting Oven Temperature; Restoring To Factory Default Settings; Operating Oven Light - Frigidaire FGEF3055MF Use & Care Manual

Frigidaire fgef3055mf: user guide
Hide thumbs Also See for FGEF3055MF:
Table of Contents

Advertisement

Adjusting the oven temperature
Your appliance has been factory calibrated and tested to
ensure an accurate baking temperature. For the first few
uses, follow your recipe times and temperature
recommendations carefully. If you think the oven is
cooking too hot or too cool for your recipe times, you can
adjust the control so the oven cooks hotter or cooler than
the temperature displayed.
The oven temperature may be increased +35°F (+19°C)
or decreased -35°F (-19°C) from the factory settings.
Example: increase the oven temperature by 30°F:
Step
1. Press and hold bake
for 6 seconds.
2. Enter 30.
3. To accept, press start.
Example: decrease the oven temperature by 30°F:
Step
1. Press and hold bake
for 6 seconds.
2. Enter 30.
3. Press self clean.
4. To accept, press start.
NOTES
• Oven temperature adjustments made will not affect
the broil or self-cleaning feature temperatures.
• If the temperature shows an adjustment of -30°F, and
a +30°F adjustment is needed, you can toggle
between the (-) or (+) in the display by pressing self
clean.
• DO NOT USE oven thermometers such as those found
in grocery stores to check the temperature settings
inside your oven. These oven thermometers may vary
as much as 20 to 40 degrees from actual
temperatures.

Restoring to factory default settings

When new, your appliance was set with a few
predetermined oven control settings. Over time, the user
may make changes to these default settings.
The following functions or features have user
programmable options or adjustments that may have
been changed from the original default settings:
• 12 or 24 hour clock display mode.
• 6-Hour Engergy Savings or continuous bake mode.
• Silent or audible keypad operation.
• Oven temperature display mode (F° or C°).
• Any oven temperature offset adjustment made.
Press
• Temp probe options (some models).
• Any stored favorite recipes (some models).
Before restoring the settings, please be aware that all
changes made to the oven control settings will be
erased once the start keypad is pressed. This includes
any temperature offset made for the oven when baking.
Press
To restore oven control to default settings:
Step
1. Press and hold 7 keypad until
acceptance tone sounds
(about 6 seconds).
2. To accept, press start.
Operating the oven light
The interior oven light will automatically turn ON when the
oven door is opened.
Press
whenever the oven door is closed.
The interior oven light is located at the upper left rear wall
of the oven interior and is covered with a glass shield held
by a wire holder. The glass shield must be in place
whenever the oven is in use.
To change the interior oven light, see "Changing the oven
light" in the Care & Cleaning section.
SETTING OVEN CONTROLS
IMPORTANT
to turn the interior oven light ON and OFF
Press
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gallery fggf3054mElectric rangesCgef3059rf

Table of Contents