Canon GL1 Instruction Manual page 44

Notes:
• While the camera records the still, you cannot use the camera functions (POWER switch/STANDBY
E
lever do not respond until recording is complete). This applies even when you haven't loaded a cassette.
• The wireless controller's PHOTO button has no half-way setting, press the button fully and the camera
immediately takes the "photo".
• For even greater versatility attach a Canon Speedlite for flash photography (available as optional
accessories, see page 45), when taking still pictures directly from record pause mode.
• Only take "photos" where it is bright enough to see the image in the display.
• If you want to use an effect, make sure you set it before you take your picture (you cannot use the fade
trigger while taking a still picture).
• Depending on the subject (fast moving subject, for example), the picture may be blurred.
44