Canon GL1 Instruction Manual page 27

Indicators that appear in the LCD display when "mirror" is selected:
• All indicators appear normally in the viewfinder.
Built-in speaker and headphone terminal
The camcorder has a built-in speaker and a headphone terminal so you can review the sound track
alongside the picture during playback. Use the speaker or headphones when viewing playback with the
LCD screen, and use headphones when viewing with the viewfinder. The built-in speaker is monaural; use
headphones for stereo sound.
Adjust the speaker and headphone volume with the +/– VOLUME buttons.
• Press the + button to increase the volume, and the – button to lower the volume.
• A VOLUME bar appears in the display to indicate the current volume. It disappears in four seconds.
• You can turn off the volume completely by pressing the – button until OFF appears.
• You can also adjust the headphone volume separately from the built-in speaker, either during VCR
mode or camera mode. The volume level is the same regardless of mode.
• The levels you adjust for the built-in speaker and headphones are memorized separately. The camera
remembers your levels even if you slide the POWER switch to OFF.
Notes:
• The speaker turns off when the camera is set to camera mode or when you use headphones.
• Sometimes the playback picture becomes rough with "noise", when the volume is turned up high. If this
happens, turn down the volume.
REC
REC PAUSE
EJECT
VOLUME
E
27