Table of Contents
Advertisement
For satisfactory use of your oven, become familiar with the various pad features and functions of the oven as described below.
Feature indicator
lights— These
indicator lights show
which feature is active.
Clock pad— Use to
set the time of day.
Timer on-off pad—
Use to set or cancel
the minute timer. The
minute timer does not
start or stop cooking.
Timer on-off pad is
used to set the
Start time pad—
continuous bake
Use to set the
function.
desired start time
for baking & Self-
Clean. May be used
with bake time to
program a delayed
timed bake.
Setting the clock
When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash "12:00". It is recommended to always set the
clock for the correct time of day before using the appliance.
To set the clock:
1. Press clock once (do not hold key pad down).
2. Within 5 seconds, press and hold the
the correct time of day appears in the display.
NOTE
The clock cannot be changed when the oven is set for
cooking or clean is active.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
Bake time pad— Use
to enter the length of
baking time desired.
Oven, preheat & door locked lights — The "oven" light will
glow each time the oven turns on to maintain the set oven
temperature. The "preheat" light will glow when the oven is
first set to operate, or if the desired temperature is reset higher
than the actual oven temperature. The "door locked" light will
flash when the oven door locks and unlocks, the oven door
lockout is active or when the self-clean feature is active.
or
OVEN CONTROL FUNCTIONS
Up and down arrow pads— Use with the
feature or function pads to set oven
temperature, bake time, start time, clean time
(when programming an automatic start time),
setting or adjusting the clock and minute timer.
Changing temperature display (°F or °C)
The electronic oven control is set to display °F (Fahrenheit)
when shipped from the factory. The oven may be
programmed for any temperature from 170°F to 550°F
(77°C to 287°C).
NOTE
The temperature display feature cannot be changed
until
when the oven is set for cooking or clean is active.
To change the temperature to display °C (Celsius) or
from °C to °F:
1. Press broil. "— —" appears in the display.
2. Press and hold the
display.
3. Press and hold broil until °F or °C appears in the
display.
4. Press the
5. Press any control pad to return to normal operating
mode.
Bake pad—Use
to select the bake
feature.
SETTING OVEN CONTROLS
until "HI" appears in the
or
to change °F to °C or °C to °F.
Broil pad— Use to select
the variable broil feature.
Clean pad— Use to set a
Self-Clean cycle.
Clear off pad— Use to
clear any feature
previously entered except
the time of day and
minute timer. Press clear
off to stop cooking.
Also use clear off to
activate oven lockout
feature.
11
Advertisement
Table of Contents
