Reviewing and Searching when Recording
In record pause mode, this function allows you to review the last few seconds of your
recording to check if it has been recorded properly.
Press and release the c (record review) button.
The camcorder rewinds the tape, plays back the last few seconds,
and returns to record pause mode.
In record pause mode, this function allows you to play back the tape (forward or
reverse) to locate the point where you wish to begin recording.
Press and hold the REC SEARCH + button (forward) or –
• Release the button at the point you wish to begin recording.
• The camcorder returns to record pause mode.
REC SEARCH – button/
v (record review) button
REC SEARCH + button