Powering The Gl1 - Canon DM-GL1 Instruction Manual

Powering the GL1

Before operating your camera, you will need to use the power adapter to:
E
provide power from an AC outlet
or
charge a battery pack
Notes:
• The power adapter converts current from a household power socket (100–240 V AC, 50–60 Hz) to the
DC current used by your camera.
• If the adapter is used next to a TV, it may cause the TV to emit noise — move the adapter away from
the TV or the antenna cable.
Connecting the camera to an AC outlet
Use the power adapter and the DC coupler to provide your camera with instant power from an AC outlet.
1. Attach the DC coupler to the camera.
• Extend the viewfinder and rotate it upwards.
• Align the edge of the DC coupler with the line on the camera.
• Slide the coupler down in the direction of the arrow, until it clicks into place.
2. Connect the DC coupler to the adapter.
3. Plug the adapter into an AC outlet.
4. Detach the DC coupler after use.
• Press and hold the BATTERY RELEASE button, while you slide the coupler up.
• Always turn the camera off and raise the viewfinder before removing the power source.
16
1
3
2
4