Adjusting The Focus Manually - Canon Optura 50 Instruction Manual

Adjusting the Focus Manually

Autofocus may not work well on the following subjects. In such case, focus manually.
Reflective
surfaces
Zoom lever
Focus ring
CAMERA
1. Set the mode dial to a mode other than
2. Adjust the zoom.
3. Press the FOCUS button.
"MF" appears.
4. Turn the focus ring to adjust the focus.
• Turn the focus ring until the image appears focused.
• Press the FOCUS button to return to autofocus.
The setting resets to autofocus when you switch the mode dial to
Readjust the focus when you have turned off the camcorder.
Infinity Focus
Use this function when you wish to focus on faraway subjects such as mountains or
fireworks.
Press the FOCUS button more than 2 seconds after step 2 in Adjusting
the Focus Manually.
" " appears.
When you operate the zoom or turn the focus ring, "
camcorder change to manual focusing mode.
Subjects with low
contrast or without
vertical lines
PLAY (VCR)
Through
Fast Moving
dirty or wet
Subjects
windows
CARD CAMERA
.
" changes to "MF" and the
Night Scenes
Mode dial
FOCUS button
CARD PLAY
.
E
53