Canon Optura 50 Instruction Manual page 44

TVs with S (S1)-Video Input Terminal
Refer also to the TV or VCR instruction manual.
1. Turn off all devices before starting the connections.
2. Connect the S-150 S-video Cable (optional) to the S-video terminals.
3. Connect the STV-250N Stereo Video Cable to the camcorder's AV
terminal and the audio terminals of the TV/VCR.
Connect the white plug to the white AUDIO terminal L (left), and the red plug to the red
AUDIO terminal R (right). Do not connect the yellow plug.
4. If connecting to a TV, set the input selector to VIDEO. If connecting to
a VCR, set the input selector to LINE.
We recommend powering the camcorder from a household power source.
The picture quality is higher when connecting to a TV with an S (S1) terminal.
Optional S-150 S-Video Cable required.
TVs with S1-terminal or Video ID-1 system: Recordings made in the widescreen
mode will be automatically played back in widescreen mode.
44
Signal flow
S-150 S-video Cable (optional)
Signal flow
STV-250N Stereo Video Cable
(supplied)
INPUT
S(S1)-VIDEO
VIDEO
AUDIO
L
R