Screen Displays During Recording - Canon Optura 50 Instruction Manual

When powered by a battery pack, the camcorder shuts off after 5 minutes
when the camcorder is left without any operation to save power (
Approximately 30 seconds before the camcorder shuts off, "
POWER OFF" appears in the center of the screen. If the camcorder shuts
off, turn the POWER switch to OFF and back on again.
About the LCD and viewfinder screen: The screens are produced with
extremely high-precision manufacturing techniques, with more than
99.99% of the pixels operating to specification. Less than 0.01% of the
pixels may occasionally misfire or appear as black or green dots. This has
no effect on the recorded image and does not constitute a malfunction.

Screen Displays during Recording

Time Code
Indicates the recording time in hours,
minutes and seconds.
Remaining tape
Indicates the remaining time of the tape
in minutes. " " moves during
recording. " END" flashes when the
tape reaches the end.
• When the time left is less than 15
seconds, the remaining tape time may
not appear.
• Depending on the type of the tape, the
indication may not be displayed
correctly.
Remaining battery charge
The battery symbol indicates the charge
status of the battery pack.
• " " starts flashing in red when the
battery pack is empty.
• When you attach an empty battery
pack, the power may turn off without
displaying " ".
• The actual battery charge may not be
indicated accurately depending on the
condition under which battery pack
and camcorder are used.
Recording reminder
The camcorder counts from 1 to 10
seconds when you start recording. This
is helpful to avoid scenes that are too
short.
75).
AUTO
E
31