Canon PIXMA MX310 series Quick Start Manual page 62

User's Data List
The User's data list enables you to confirm the current settings of the machine as well as the
registered sender information. See "Registering Sender Information" on page 34.
Printing the User's Data List
1
Press the FAX button, then press the Menu button.
2
Press the [ or ] button to select PRNT REPORT/LIST, then press the OK button.
3
Press the [ or ] button to select USER'S DATA LIST, then press the OK button.
The User's data list is printed.
Other Lists
TX Report
The machine can print a TX (transmission) report after sending a document, confirming whether
the transmission was completed successfully. You can set the machine to print every time it
sends a document, or only when an error occurs. Alternatively, you can disable printing of the
report.
Note
For details on the TX report setting, refer to "TX REPORT" in "FAX SETTINGS" of the User's
Guide on-screen manual.
The default setting is PRINT ERROR ONLY.
RX Report
The machine can print an RX (reception) report after receiving a document, confirming whether
the reception was completed successfully. You can set the machine to print every time it
receives a document, or only when an error occurs. Alternatively, you can disable printing of the
report.
Note
For details on the RX report setting, refer to "RX REPORT" in "FAX SETTINGS" of the User's
Guide on-screen manual.
The default setting is DO NOT PRINT.
58 Faxing