Canon PIXMA MX870 Series Getting Started page 8

2
Do not turn the
power on yet.
To use the machine as a fax,
a telephone line needs to be
connected.
This section describes the
basic method of telephone line
connection.
For other connection methods,
refer to the on-screen manual:
Basic Guide.
When not using as a fax:
When using as both a fax and
telephone:
When using as a fax only:

Go to "3 Turn the Power
Connect the machine with a
On" on page 7.
telephone line using the supplied
telephone line cable (A).
When using as a fax only:
only
• If you cannot send
faxes after installing
the machine, check the
telephone line type.
For details, refer to
"Confirming the Telephone
Line Connection" in the
on-screen manual: Basic
Guide.
1
Go to "3 Turn the Power On" on
page 7.
2
Only when connecting a telephone:
2
A
Remove the Cap (B) (1), then connect a telephone
with the telephone line cable (2).
• Do not connect the machine and a telephone
in parallel to the same telephone line using a
distribution adapter. The machine may not operate
properly.
1
B