Texas Instruments TPS65400 User Manual
Texas Instruments TPS65400 User Manual

Texas Instruments TPS65400 User Manual

Buck converter evaluation module

Advertisement

Quick Links

www.ti.com
User's Guide
TPS65400 Buck Converter Evaluation Module User's
Guide
This document presents the information required to operate the TPS65400 PMIC as well as the support
documentation including schematic, layout, hardware setup and bill of materials.
1
Background.............................................................................................................................................................................2
2 TPS65400 EVM Schematic.....................................................................................................................................................
Layout...........................................................................................................................................................................4
4 Bench Test Setup Conditions................................................................................................................................................
4.2 Hardware Requirement......................................................................................................................................................
4.3 Hardware Setup.................................................................................................................................................................
Install...................................................................................................................................................................9
4.5 Software Operation..........................................................................................................................................................
5 Power-Up Procedure............................................................................................................................................................
6 Power-Down Procedure.......................................................................................................................................................
7 Bill of Materials.....................................................................................................................................................................
8 Revision History...................................................................................................................................................................
Figure 3-3. Board Layout (Second Layer)...................................................................................................................................
Figure 3-4. Board Layout (Third Layer).......................................................................................................................................
Figure 3-5. Board Layout (Bottom Layer)....................................................................................................................................
Figure 4-2. USB Interface Adapter Quick Connection Diagram..................................................................................................
Figure 4-4. Go to Main Setting Panel........................................................................................................................................
Figure 4-5. Global Commands...................................................................................................................................................
Figure 4-6. Status and Main Setting Panel................................................................................................................................
Panel....................................................................................................................................................12
Table 1-1. Summary of Performance...........................................................................................................................................
Table 4-1. Input/Output Connection.............................................................................................................................................
Table 4-2. Jumpers......................................................................................................................................................................
Materials..........................................................................................................................................................16
Trademarks
Microsoft
®
, Windows
®
, Internet Explorer
VeriSign
®
is a registered trademark of VeriSign, Incorporated.
All trademarks are the property of their respective owners.
SLVUAC4A - OCTOBER 2014 - REVISED MAY 2021
Submit Document Feedback
ABSTRACT

Table of Contents

Placement.....................................................................................................................7
List of Figures
Schematic.......................................................................................................................................3
Layer)...........................................................................................................................4
Layer)..........................................................................................................................................5
Placement............................................................................................................7
GUI.............................................................................................................10
Panel...........................................................................................................................................13
Panel..........................................................................................................................13
List of Tables
®
, and are registered trademarks of Microsoft Corporation.
Copyright © 2021 Texas Instruments Incorporated
TPS65400 Buck Converter Evaluation Module User's Guide
Table of Contents
3
7
8
8
10
14
15
16
18
5
6
6
9
10
11
11
2
8
8
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TPS65400 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Texas Instruments TPS65400

  • Page 1: Table Of Contents

    User’s Guide TPS65400 Buck Converter Evaluation Module User's Guide ABSTRACT This document presents the information required to operate the TPS65400 PMIC as well as the support documentation including schematic, layout, hardware setup and bill of materials. Table of Contents Background.....................................2 2 TPS65400 EVM Schematic..............................
  • Page 2: Background

    EVM. The evaluation module is designed to provide access to the features of the TPS65400. Some modifications can be made to this module to test performance at different input and output voltages for bucks. Please contact the TI Field Applications group for advice on these matters.
  • Page 3: Tps65400 Evm Schematic

    TP17 TP18 TP19 TP20 TP21 TP22 TP23 1.0k 1.0k I2CADDR I2CADDR Figure 2-1. TPS65400 EVM Schematic SLVUAC4A – OCTOBER 2014 – REVISED MAY 2021 TPS65400 Buck Converter Evaluation Module User's Guide Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 4: Board Layout

    Figure 3-1 through Figure 3-5 illustrate the printed-circuit board (PCB) layouts. Figure 3-1. Component Placement (Top Layer) TPS65400 Buck Converter Evaluation Module User's Guide SLVUAC4A – OCTOBER 2014 – REVISED MAY 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 5: Figure 3-2. Board Layout (Top Layer)

    Board Layout Figure 3-2. Board Layout (Top Layer) Figure 3-3. Board Layout (Second Layer) SLVUAC4A – OCTOBER 2014 – REVISED MAY 2021 TPS65400 Buck Converter Evaluation Module User's Guide Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 6: Figure 3-4. Board Layout (Third Layer)

    Board Layout www.ti.com Figure 3-4. Board Layout (Third Layer) Figure 3-5. Board Layout (Bottom Layer) TPS65400 Buck Converter Evaluation Module User's Guide SLVUAC4A – OCTOBER 2014 – REVISED MAY 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 7: Bench Test Setup Conditions

    2. LX of VOUT2 3. LX of VOUT3 4. LX of VOUT4 VOUT1, VOUT2, VOUT3, VOUT4 SLVUAC4A – OCTOBER 2014 – REVISED MAY 2021 TPS65400 Buck Converter Evaluation Module User's Guide Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 8: Hardware Requirement

    1-1. Additional input capacitance may be required in order to mitigate the inductive voltage droop that may occur during a load transient event. In order to change the output voltage by sending the digital control signal via a PC running the TPS65400 controller software and USB2ANY interface box, perform the following steps: 1.
  • Page 9: Software Install

    To run the software after installation, go to Start → All programs → Texas Instruments → PI-Commander-0.8.4-672M → PI-Commander-PMU. At start-up, the software first checks the firmware version of the USB2ANY adapter box. If an incorrect firmware version is installed, the software automatically searches on the Internet (if connected) for updates.
  • Page 10: Software Operation

    This section provides descriptions of the EVM software. The supplied software is used to communicate with the TPS65400 EVM. Click on the icon on the host computer to start the software. The software displays the main control panel to connect with the EVM board.
  • Page 11: Figure 4-5. Global Commands

    Then, a detail setting panel is presented as shown in Figure 4-5. Figure 4-5. Global Commands Figure 4-6. Status and Main Setting Panel SLVUAC4A – OCTOBER 2014 – REVISED MAY 2021 TPS65400 Buck Converter Evaluation Module User's Guide Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 12: Figure 4-7. Phase Shift Panel

    GUI. Detailed information for each option is in the datasheet. Reference the datasheet and select the right option for your application (http://www.ti.com/products/tps65400). One option is to Apply Changes Immediately; if this checkbox is selected, any change is immediately sent to the EVM.
  • Page 13: Figure 4-8. Power Sequence Panel

    Bench Test Setup Conditions Figure 4-8. Power Sequence Panel Figure 4-9. Vref Ramping Up and Down Panel SLVUAC4A – OCTOBER 2014 – REVISED MAY 2021 TPS65400 Buck Converter Evaluation Module User's Guide Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 14: Power-Up Procedure

    USB port on the host computer 2. Apply 12 V to J6 3. Open the GUI on computer TPS65400 Buck Converter Evaluation Module User's Guide SLVUAC4A – OCTOBER 2014 – REVISED MAY 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 15: Power-Down Procedure

    1. Close the GUI on computer 2. Remove or shutdown 12 V on J6 3. Remove USB2ANY SLVUAC4A – OCTOBER 2014 – REVISED MAY 2021 TPS65400 Buck Converter Evaluation Module User's Guide Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 16: Bill Of Materials

    CRCW060312K7FKEA Vishay-Dale R4, R9, R14, R20 15.4k RES, 15.4 k, 1%, 0.1 W, 0603 CRCW060315K4FKEA Vishay-Dale TPS65400 Buck Converter Evaluation Module User's Guide SLVUAC4A – OCTOBER 2014 – REVISED MAY 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 17 Integrated Sequencing, RGZ0048G or LM26430RGZ FID1, FID2, FID3 Fiducial mark. There is nothing to buy or mount. Fiducial SLVUAC4A – OCTOBER 2014 – REVISED MAY 2021 TPS65400 Buck Converter Evaluation Module User's Guide Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 18: Revision History

    Updated user's guide title........................... • Updated the numbering format for tables, figures, and cross-references throughout the document....2 TPS65400 Buck Converter Evaluation Module User's Guide SLVUAC4A – OCTOBER 2014 – REVISED MAY 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated...
  • Page 19 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
  • Page 20 www.ti.com Regulatory Notices: 3.1 United States 3.1.1 Notice applicable to EVMs not FCC-Approved: FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and software developers to write software applications for use with the end product.
  • Page 21 www.ti.com Concernant les EVMs avec antennes détachables Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à...
  • Page 22 www.ti.com EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS. 4.2 User must read and apply the user guide and other available documentation provided by TI regarding the EVM prior to handling or using the EVM, including without limitation any warning or restriction notices.
  • Page 23 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2019, Texas Instruments Incorporated...
  • Page 24 TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products.IMPORTANT NOTICE Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2021, Texas Instruments Incorporated...

Table of Contents