Installation And Instructions - Mitsubishi Electric FR-F840-00023 Installation Manuallines

1 INSTALLATION AND INSTRUCTIONS

1.1 Inverter Type
F R - F 8 2 0 - 00046 - 1
Symbol Voltage class Symbol Structure, functionality
2 200V class 0
4 400V class 2
Capacity plate
Inverter model
Serial number
*1
Specification differs by the type. Major differences are shown in the table below.
Type Monitor output
FM Terminal FM: pulse train output
(terminal FM Terminal AM: analog voltage output
equipped model)
CA Terminal CA: analog current output
(terminal CA
equipped model) Terminal AM: analog voltage output
*2
Model with built-in Ethernet board (FR-A8ETH)
*3
Conforming to IEC60721-3-3 3C2/3S2
*4
For the FR-F820-00340(7.5K) or higher, and the FR-F840-00170(7.5K) or higher
Notes
The rating plate shows the inverter rated current in SLD operation (Super Light Duty). The overload current rating at
SLD is 110% of the rated current for 60s and 120% for 3s at surrounding air temperature of max. 40°C.
The inverter model name used in this installation guide consists of the inverter model, e. g. FR-F820-00046-1 and the
applicable motor capacity in brackets specified in [kW]. This approach helps for better understanding and for
choosing the right motor. For further specification details like capacity, current or overload current rating refer to
chapter 7.
In this installation guideline the following common designations are used for the different types of inverter models:
– FR-F8 0: Standard model
– FR-F8 2: Separated converter type
– FR-F8 -E: Model with built-in Ethernet board (FR-A8ETH)
For selecting the right frequency inverter you should know details of your application and especially the load
characteristic.
Symbol Description
00023 to
Standard model
12120
0.75 to
Separated converter type
560K
(0 to ±10VDC)
(0 to 20mADC)
(0 to ±10VDC)
Symbol Type
Inverter SLD rated cur-
1
rent [A]
Inverter LD rated capacity
E1
[kW]
2
E2
Rating plate
Inverter model
Input rating
Output rating
Serial number
Country of origin
Built-in Control
EMC filter logic
OFF Sink logic
ON Source
logic
Communica- Symbol Circuit board
*1
tion type
Standard Without
FM
*2
-60
Ethernet
*4
Standard
-06
CA
*2
Ethernet
Initial setting
Pr. 19 "Base
Rated
frequency
frequency
voltage"
60Hz 9999
(same as the
power supply
voltage)
50Hz 8888
(95% of the
power supply
voltage)
Plated
*3
coating conductor
Without Without
With Without
With With
Pr.570 "Multiple
rating setting"
1
(LD rating)
0
(SLD rating)
1