Cycle Setting Buttons - LG WM2801HLA User's Manual & Installation Instructions

CYCLE SETTINg BUTTONS

Each cycle has preset settings that are selected
automatically. You may also customize the
settings using the cycle setting buttons. Press
the button for that option to view and select
other settings.
The washer automatically adjusts the water level
for the type and size of wash load for best results
and maximum efficiency. It may seem there is no
water inside the drum in some cycles, but this is
normal.
NOTE: To protect your garments, not every wash/
rinse temperature, spin speed, soil level, or option
is available with every cycle. See the Cycle Guide
for details.
WASH/RINSE
Selects the wash and rinse
temperature combination for the
selected cycle. Press the WASH/
RINSE button repeatedly to scroll
through available settings.
• Your washer features a heating element to boost
the hot water temperature for Extra Hot settings.
This provides improved wash performance at
normal water heater settings.
• Select the water temperature suitable for the
type of load you are washing. Follow the fabric
care label for best results.
• Warm rinses leave the loads drier than cold
rinses. Warm rinses can increase wrinkling.
• In cold climates, a warm rinse makes the load
more comfortable to handle.
• Cold rinses use less energy.
SOIL LEVEL
Adjusts the selected cycle to allow
more time for heavily soiled clothes
or less time for lightly soiled
clothes.
H O W TO U S E
SPIN SPEED
The washer drum spins at up to
1,300 RPM. This reduces drying
time and saves energy.
Press the SPIN SPEED button to
select the maximum spin speed. Some fabrics,
such as delicates, require a slower spin speed.
The Drain & Spin cycle:
The Spin Speed button also activates the Drain
& Spin cycle to drain the tub and spin clothes;
for example, if you want to remove clothes before
the cycle has ended.
To activate the DRAIN & SPIN cycle:
1
Press the ON/OFF button to turn on
the washer.
2
Press the SPIN SPEED button.
3
Select the desired spin speed.
NOTE: If NO SPIN is selected, the washer
will drain only.
4
Press the START/PAUSE button.
BEEPER
Adjusts the volume of the end-of-
cycle beeper, or turns it off.
2