Troubleshooting; Normal Sounds You May Hear; Before Calling For Service - LG WM2501HWA User's Manual & Installation Instructions

3.5 cu.ft. large capacity front load washer with truesteam technology
Hide thumbs Also See for WM2501HWA:
Table of Contents

Advertisement

Available languages

Available languages

NORMAL SOUNDS YOU MAY HEAR

The following sounds may be heard while the
washer is operating. They are normal.
Clicking:
Door lock relay when the door locks and unlocks.
Spraying or hissing:
Water spraying or circulating during the cycle.

BEFORE CALLINg FOR SERVICE

Your washing machine is equipped with an automatic error-monitoring system to detect and diagnose
problems at an early stage. If your washer does not function properly or does not function at all, check the
following before you call for service.
Problem
Rattling and
clanking noise
Thumping sound
Vibrating noise
Water leaking
around washer
Excessive sudsing
Possible Causes
• Foreign objects, such as
keys, coins, or safety pins,
may be in drum or pump.
• Heavy wash loads may
produce a thumping sound.
• Washer load may be out
of balance.
• Shipping bolts and/or
packaging materials not
removed.
• Wash load may be unevenly
distributed in the drum.
• Not all leveling feet are resting
firmly on the floor.
• Floor not rigid enough.
• Fill hose connection is loose
at tap or washer.
• House drain pipes are
clogged.
• Too much detergent or
incorrect detergent.
T RO U B L E S H O OT I N G
Humming or gurgling:
Drain pump pumping water from the washer at
the end of a cycle.
Splashing:
Clothes tumbling in the drum during the wash
and rinse cycles.
Solutions
• Stop washer and check drum and drain filter for
foreign objects. If noise continues after washer is
restarted, call for service.
• This is normal. If sound continues, washer is
probably out of balance. Stop and redistribute
wash load.
• Stop and redistribute wash load.
• See Installation Instructions for removing shipping
bolts and packaging.
• Stop washer and rearrange wash load.
• Adjust the leveling feet. Make sure all four feet are in
firm contact with the floor while the washer is in the
spin cycle with a load.
• Make sure that the floor is solid and does not flex.
Refer to "Flooring" in the Installation section.
• Check hoses. Check and tighten hose connections.
• Unclog drain pipe. Contact a plumber if necessary.
• Reduce detergent amount or use low-sudsing
detergent.
Only use detergent with the HE
(High-Efficiency) logo.
1
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Steam washer wm2501h*a

Table of Contents