Special Functions - LG WM2301HW User's Manual And Installation Instructions

3.6 cu.ft. large capacity front load washer with dual led display
Hide thumbs Also See for WM2301HW:
Table of Contents

Advertisement

Available languages

Available languages

SPECIAL FUNCTIONS

The option buttons also activate special
functions, including LOAD SIZE, BEEPER
ON/OFF, CHILD LOCK, TUB CLEAN, and
SPINSENSE™. Press and hold the option button
marked with the special function for 3 seconds to
activate.
LOAD SIZE
At the beginning of the cycle, the washer tumbles
the load and detects the weight of the
clothes. The display will indicate the
approximate load size in the LOAD SIZE
display. This allows you to adjust the
amount of detergent and other additives for best
results and improved efficiency. See page 23 for
details.
CHILD LOCK
Use this option to prevent unwanted use of the
washer or to keep cycle settings
from being changed while the washer
is operating. Press and hold the
PREWASH button for 3 seconds to
activate or deactivate CHILD LOCK.
The lock icon will be shown in the display, and all
controls are disabled. The washer can be locked
during a cycle. Once CHILD LOCK is selected,
the display will alternate between CL and the time
remaining.
TUB CLEAN
A buildup of detergent residue can occur in the
wash tub over time and can lead to
a mildewy or musty smell. The TUB
CLEAN cycle is specially designed to
remove this buildup. Press and hold the
EXTRA RINSE button for 3 seconds to activate this
cycle. After the cycle has ended, open the door
and allow the drum interior to dry completely.
NOTE: Do NOT use this cycle with clothes,
and do NOT add detergent or fabric softener.
NOTE: If you use the TUB CLEAN cycle on a
monthly basis, the wash drum will be kept clean.
H O W TO U S E
H O W TO U S E
SPINSENSE™
SPINSENSE™ can be used to help reduce or
eliminate vibrations, especially on wood
floor installations.
To activate SPINSENSE™:
While the washing machine is running in any
cycle, press and hold the STAIN CYCLE button
for 3 seconds.
The SPIN SPEED light will blink while
the washer is running to show that SPINSENSE
is active. The SPINSENSE™ function will remain
active for every cycle, even after a power failure.
To cancel SPINSENSE™:
Press and hold the STAIN CYCLE button for 3
seconds to turn off the SPINSENSE™ function.
BEEPER ON/OFF
You may turn the end-of-cycle beeper on or off
with the WATER PLUS button
Press and hold the WATER PLUS
button for 3 seconds to turn the beeper
OFF.
Press and hold the WATER PLUS button again for
3 seconds to turn the beeper back on.
HAND WASH/WOOL
• Only woolen items that are designated as "Machine-Washable"
should be washed in this washing machine
• Wash only small loads for optimum fabric care (less than 8 lbs.)
• Only neutral (wool safe) detergents should be used (Only a small
quantity of detergent is needed due to the small load size and
low volume of water in the cycle.)
• The HANDWASH/WOOL cycle uses a gentle tumble action and
low speed spin for ultimate fabric care
The wool wash cycle of this machine has been
approved by Woolmark for the washing of machine
washable Woolmark products provided that the
products are washed according to the instructions
®
on the garment label and those issued by the
manufacturer of this washing machine, M0807
Certifi ed by NSF
Certifi cado por NSF
NSF International (formerly the National Sanitation Foundation),
certifies that SANITARY cycle reduces 99.9% of bacteria on
laundry, and none of bacteria will carry over onto the next laundry
load.
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wm2301h series

Table of Contents