Emptying The Dust Tank; Cleaning The Dust Tank - LG LUV200R Owner's Manual

CARE & CLEANING

Emptying the Dust Tank

WARNING
Electrical shock and personal injury hazard.
Always unplug power cord from electrical
outlet before performing any service on
vacuum cleaner. Failure to do so could
result in electrical shock or personal injury
from vacuum cleaner suddenly starting.
For best performance, always empty the dust
tank when the dirt level reaches the MAX line.
TO REMOVE DUST TANK:
Press the dust tank release button, tilt the dust
tank back, then lift it out of the vacuum cleaner.
TO EMPTY DUST TANK:
Press the emptying dirt release and open the
bottom plate, as shown.
16
TO REINSTALL THE DUST TANK:
Place it in the holder, then tilt forward until it clicks
into place. Make sure the dust tank is properly
seated!
Warning: Do not touch the gears or switches
located on the main body below the dust bin.

Cleaning the Dust Tank

For optimal performance, check filters regularly
and clean when necessary.
To Clean the Dust Tank:
1. Remove the dust tank from the vacuum cleaner.
2. Press the dirt release and open the bottom plate.
3. Wipe out the dust tank with a soft cloth or paper
towel.
4. Release the latch on the Side door on both the
right and left sides.
5. Remove any hair, fibers or other debris from the
dust separator.
Do not remove the cones attached to the side
door for cleaning.
NEVER operate the vacuum cleaner with
wet filters or components!