LG LSFD2591ST Owner's Manual page 12

French door refrigerator
Table of Contents

Advertisement

Install this appliance in an area where the
temperature is between 55°F (13°C) and 110°F
(43°C). If the temperature around the appliance
is too low or high, cooling ability may be
adversely affected.
Too small of a distance from adjacent items
may result in lowered freezing capability and
increased electricity consumption charges.
Allow at least 24 inches (61 cm) in front of the
refrigerator to open the doors, and at least
2 inches (5.08 cm) between the back of the
refrigerator and the wall.
Removing the doors is always
recommended when it is necessary to
move the refrigerator through a narrow
opening. If it is necessary to remove the
handles, follow the directions below.
1
Loosen the set screws
Allen wrench and remove the handle.
2
Loosen the mounting fasteners
connect to the refrigerator door and handle
1
using a
/
in. Allen wrench, remove the
4
mounting fasteners.
1
Assemble the mounting fasteners
both ends of the handle using a
Allen wrench.
2
Place the handle on the door by fitting
the handle footprints over the mounting
fasteners and tightening the set screws
3
with a
/
in. Allen wrench.
32
3
with a
/
in.
32
that
at
1
/
in.
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lsfd2591 series

Table of Contents