English - Kenwood CM561 Manual

safety
Never operate the coffee dispensing
lever by hand, always use a cup or
mug.
Watch out for steam, never lift the lid
or remove parts during the brewing
cycle.
Take care when dispensing coffee,
as burns can occur from touching
hot liquids.
Never touch the keep warm plate
during or after the brewing cycle.
Always use the handles provided to
remove parts from the BrewMaster.
Keep children away from the
machine. And never let the cord
hang down where a child could grab
it.
Never use a damaged machine. Get
it checked or repaired: see 'service'.
Never put the machine in water or let
the cord or plug get wet - you could
get an electric shock.
Unplug:
before filling with water
before cleaning
after use.
Never leave the machine on
unattended.
Don't let the cord touch hot parts.
Don't let infirm people use the
machine without supervision.
Don't let children play with this
machine.
Only use the machine for its
intended domestic use.
Always make sure there is water in
the water reservoir before switching
on.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of your machine.
This machine complies with
European Economic Community
Directive 89/336/EEC.
before using for the first time
1 Remove all packaging
2 Wash the parts: see 'care and
cleaning'.
3 Run two lots of water through the
machine (without coffee) to clean it
out. Each time pour one coffee tank
of cold water filled to the 'MAX' level
into the water reservoir. See 'to
make coffee'.
key
permanent filter
filter holder
coffee tank
hot coffee outlet
lid
water reservoir
keep warm plate
coffee dispensing lever
measuring scoop
drip tray
ON/OFF button (CM450/CM460
series only)
CM550/CM560 series only
clock
Auto/ON/OFF button
Prog (programme) button
hour button
minute button
to make coffee
1 Fill the coffee tank with the desired
amount of water. Use the markings
on the inside below the pouring
spout as a guide. Do not exceed the
'MAX' level.
Use cold water. We recommend
using filtered water from a Kenwood
Water Filter as it reduces limescale.
Never use warm or fizzy water.
2 Pour the water from the coffee tank
into the water reservoir.
3 Place the coffee tank on the keep
warm plate, then fit the filter holder.
4 Place the permanent filter into the
filter holder.
2