Canon PIXMA K10332 Getting Started page 14

7
Windows
If the Found New Hardware or Found New
Hardware Wizard dialog box appears:
1
Remove the USB cable connected to
your computer.
The dialog box may close. In this case, proceed
from .
2
Click Cancel to quit the dialog box.
3
Proceed from .

Macintosh
1
A
TURN OFF THE MACHINE (A).
• Operating noise continues for about 25 seconds
until the machine turns off. Make sure that the
ON button (A) stops flashing.
2
Turn on the computer, then insert the Setup CD-ROM
into the CD-ROM drive.
The setup program should start automatically.
Windows Vista
Windows XP/2000
• If the program does not start automatically, double-click the
CD-ROM icon on the computer. When the CD-ROM contents
appear, double-click MSETUP4.EXE.
Go to Step .
Go to Step .