Connections To Your Tv - LG BH200 Owner's Manual

BH200-N_AUSALLK_ENG 4/18/08

Connections to Your TV

Make one of the following connections, depending
on the capabilities of your existing equipment.
Tips
Depending on your TV and other equipment you
wish to connect, there are various ways you
could connect the player. Use only one of the
connections described below.
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
Caution
– Make sure the player is connected directly to the
TV. Tune the TV to the correct video input chan-
nel.
– Do not connect the player's AUDIO OUT jack to
the phono in jack (record player) of your audio
system.
– Do not connect your player via your VCR. The
image could be distorted by the copy protection
system.
Component Video Connection
Connect the COMPONENT VIDEO OUT jacks on
the player to the corresponding input jacks on the
TV using Y Pb Pr cables (C).
Tip:
When you use COMPONENT VIDEO OUT connec-
tion, you can change the resolution for the output.
(Refer to "Resolution setting" on page 18.)
Video Connection
Connect the VIDEO OUT jack on the player to the
video in jack on the TV using a video cable (V).
Note: With Film Mode "On", composite video
(yellow video jack) is not active.
Audio (Left/Right) Connection
Connect the left and right AUDIO OUT jacks of the
player to the audio left and right IN jacks on the TV
using the audio cables (A).
9:28 AM Page 15
Rear of TV
VIDEO
AUDIO INPUT
COMPONENT VIDEO INPUT
INPUT
Pr
R Y Pb
L
A V C
Rear of the
player
15