LG AHNW146A0 Owner's Manual page 12

Owner's instruction
Selecting Target Temperature
You can set the proper temperature each mode.
❊
Note
: Decrease 1°C or 2°F per one time pressing
: Increase 1°C or 2°F per one time pressing
• We can change the temperature range of each mode on installation setting mode. Please refer
Function Code 11 to 15.
• Room Temperature setting is available when Remote Room Air Sensor (sold separately) is
installed. Please refer Function Code 03.
12 Air-to-Water Heat Pump Owner's Manual
1 Press Power Button to turn on the
product.
2
Press SET TEMP Button to select
each operation mode.
: Room Temperature
: Leaving Water Temperature
: Sanitary Water Tank
<Room Temperature and Sanitary Water Tank
Temperature mode could be selected when Remote
Air Sensor and Sanitary Water Tank Kit are installed.>
3 Adjust desired temperature by pressing
Change Temperature buttons on each mode.
Ex1) Setting Temperature as 45°C on Leaving
Water Temperature.
Ex2) Setting Temperature as 27°C on Leaving
Water Temperature.
Temperature