4
After responding to the recoded message of the
information service, press [
] (Tone).
You can switch to the tone signal.
Specify destination.
2010 01/01 12:52AM
012XXXXXXT
Start Receiving
Resolution: 200 x 1...
5
Use the numeric keys to enter the required
numbers for the information service.
Specify destination.
2010 01/01 12:52AM
012XXXXXXT3456
Start Receiving
Resolution: 200 x 1...
6
If you want to send faxes, press [
] (B & W).
NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Telephone call
The external telephone must be connected to this machine.
Check the dial tone before entering a fax number.
If you enter the number before checking the dial tone, the call may
not be connected or the wrong number may be dialed.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Sending a Fax Abroad (Adding Pauses)
When sending a fax abroad, you may need to insert a pause
within the number.
When communicating abroad, the signal distance is extreme
and the signal route complicated. Because of this, you may not
be able to connect to a recipient by dialing an international
telephone identifi cation number, country code, and the
recipient's fax number at the same time. In this case, add a
pause after the international telephone identifi cation number.
Because adding a pause provides a point where wait time can
be added when dialing, it is easier to connect to the recipient.
Keys to be used for this operation
Pause
FAX
Numeric keys
Start