Important Safety Instructions; Power Supply - Canon Color imageCLASS MF8050Cn Basic Operation Manual

Canon printer user manual
Hide thumbs Also See for Color imageCLASS MF8050Cn:
Table of Contents

Advertisement

Important Safety Instructions

Please read these "Important Safety Instructions" thoroughly before operating the machine.
As these instructions are intended to prevent injury to the user and other persons or to prevent destruction of property, always pay
attention to these instructions and operational requirements.
Also, as it may result in unexpected accidents or injuries, do not perform any operation unless otherwise specifi ed in the manual.
Installation
WARNING
Do not install the machine in a location near alcohol, paint
thinner, or other fl ammable substances. If fl ammable sub-
stances come into contact with electrical parts inside the
machine, this may result in a fi re or electrical shock.
Do not place the following items on the machine.
-
Necklaces and other metal objects
-
Cups, vases, fl owerpots, and other containers fi lled with
water or liquids
If these items come into contact with a high-voltage area in-
side the machine, this may result in a fi re or electrical shock.
If these items are dropped or spilled inside the machine,
immediately turn off the power switches of the machine and
computer (1) and disconnect the interface cable if it is con-
nected (2). Then, unplug the power plug from the AC power
outlet (3) and contact your local authorized Canon dealer.
(2)
(1)
(2)
(1)
When installing and removing the optional accessories, be
sure to turn the machine off , unplug the power plug, and
then disconnect all the interface cables and power cord from
the machine. Otherwise, the power cord or interface cables
may be damaged, resulting in a fi re or electrical shock.
CAUTION
Do not install the machine in unstable locations, such as on
unsteady platforms or inclined fl oors, or in locations subject
to excessive vibrations, as this may cause the machine to fall
or tip over, resulting in personal injury.
The ventilation slots are provided for proper ventilation of
working parts inside the machine. Never place the machine
on a soft surface, such as a bed, sofa, or rug. Blocking the
slots can cause the machine to overheat, resulting in a fi re.
Do not install the machine in the following locations, as this
may result in a fi re or electrical shock.
-
A damp or dusty location
(2)
(3)
(1)
(2)
(3)
(1)
-
A location exposed to smoke and steam, such as near a
cookery or humidifi er
-
A location exposed to rain or snow
-
A location near a water faucet or water
-
A location exposed to direct sunlight
-
A location subject to high temperatures
-
A location near open fl ames
When installing the machine, gently lower the machine to
the installation site so as not to catch your hands between
the machine and the fl oor or between the machine and
other equipment, as this may result in personal injury.
When connecting the interface cable, connect it properly by
following the instructions in this manual. If not connected
properly, this may result in malfunction or electrical shock.
When moving the machine, follow the instructions in this
manual to hold it correctly. Failure to do so may cause you to
drop the machine, resulting in personal injury.
"Transporting the Machine" (→P.8-13)

Power Supply

WARNING
Do not damage or modify the power cord. Also, do not place
heavy objects on the power cord or pull on or excessively
bend it. This can cause electrical damage, resulting in fi re or
electrical shock.
Keep the power cord away from all heat sources. Failure to
do so can cause the power cord insulation to melt, resulting
in a fi re or electrical shock.
The power cord should not be taut, as this may lead to a
loose connection and cause overheating, which could result
in a fi re.
The power cord may become damaged if it is stepped
on, fi xed with staples, or if heavy objects are placed on it.
Continued use of a damaged power cord can lead to an ac-
cident, such as a fi re or electrical shock.
Do not plug or unplug the power plug with wet hands, as
this can result in electrical shock.
Do not plug the power cord into a multiplug power strip, as
this can result in a fi re or electrical shock.
Do not bundle up or tie up the power cord in a knot, as this
can result in a fi re or electrical shock.
Insert the power plug completely into the AC power outlet.
Failure to do so can result in a fi re or electrical shock.
If excessive stress is applied to the connection part of the
power cord, it may damage the power cord or the wires in-
side the machine may disconnect. This could result in a fi re.
Avoid the following situations:
-
Connecting and disconnecting the power cord frequently.
-
Tripping over the power cord.
-
The power cord is bent near the connection part, and
continuous stress is being applied to the power outlet or
the connection part.
-
Applying a shock to the power connector.
vii

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Color imageclass mf8350cdn

Table of Contents