Call Setup - Motorola FXP-851 User Manual

receive the incoming call.
You can also receive the incoming call by pick the handset up without press any
other key.
Any key answer: To answer your receiving call, you can press any key except
End key and Back key.
[2] Melody
[ 2.1 ] Melody setup
Set Melody for Incoming Call and Message Tone
Note: For each tone setup, you can choose one of 10 ring tones for
Incoming call and 4 ring tones for Message Tone.
[ 2.2 ] Volume
Eight volume levels are available for Call, ring tone and keypad tone. Adjust the
volume to your preference using
[ 2.3 ] Ring Type
Ring Type: you can choose Ring Once or Repeat Ring to set the ring when
receiving a call.
[3] Display
[ 3.1 ] Idle Display
Clock and Date
When you choose Enable, you can see the date and clock on your idle display
(The phone should be in full service state, otherwise display net state)
[ 3.2 ] Contrast
41
left / right key.
There are 20 levels for LCD contrast. Press
Press left key then the contrast is down
[ 3.3 ] Backlight
Set Specific LCD and Keypad Backlight time.
1) Select Backlight and press OK key
2) Toggle Always off, 5 sec, 15 sec, 30 sec or 45 sec and press OK key
[4]

Call Setup

The following features may require a subscription to a calling plan that supports
them. Not available in all areas. Contact you telephone service provider for
availability and details
[ 4.1 ] Call Divert
Call Divert is a network or subscription dependent service. It allows you to
forward a call to another number, based on various conditions.
1) Press Menu > Settings and press OK key
2) Scroll Call Setup and press OK key
3) Press Call Divert and press OK key
4) Select one of the options below, and then press OK key
All Voice Calls: All incoming calls to a designated number.
On Busy: Divert all incoming calls when there is at least one call in progress.
No Answer : Divert the incoming call if it is not answered
Unreachable: Divert all incoming calls when the phone is not reachable due
to a network error or some other reason.
5) Select Check Status, Activate, or Deactivate and press OK key
Check Status: Check current Call Divert setting status.
Activate: Activate the chosen Call Divert option. Type the number you want a
42
right key then the contrast goes up.