System Requirements; Rear Panel - LG DH16NS10 Owner's Manual

English
Features
• Serial ATA interface
• Data transfer rate (DVD-ROM max-16X-
speed: 22,100KB/sec, CD-ROM max-52X-
speed : 7,800KB/sec)
• Motorized tray loading system
• Designed for internal mounting
• Emergency eject support
• Read compatible for DVD-R, DVD+R,
DVD+R DL, DVD-R DL, DVD-RW,
DVD+RW & DVD-RAM discs
• Supports Region playback control Phase II

System Requirements*

• IBM PC AT or compatible, Pentium-266MHz
processor or higher (higher recommended).
• Motherboard that supports Serial ATA
interface.
• A minimum of 64MB memory
(higher recommended).
/ "
• A suitable free standard 5 internal drive
1 4
bay.
• OS: Windows 2000, XP, Vista.
* Please note: Certain software (i.e. particularly
those including Video playback) may require a
considerably increased specification PC to
give acceptable results. While this DVD-ROM
drive can read DVD-video discs, decoding
them to display on your pc's monitor requires
separate MPEG decoding that is done by
separate hardware (either an MPEG decoder
card or MPEG decoding done by your video
card), or separate software that you install to
do MPEG decoding. These items are sepa-
rate and are not included with this DVD-ROM
drive.
Location and Function of
Controls
A
Front Panel
1. Disc Tray
2. Drive activity indicator
3. Emergency Eject Hole
4. Stop/Eject Button

Rear Panel

1. SATA Power connector (15pin).
2. SATA Data connector (7pin).