Table of Contents
Advertisement
Quick Links
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
A.
Cabinet
1 pc.
D.
Shelf
2 pcs.
E.
Shelf
2 pcs.
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8" Drill Bit
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
5050-13
Media Tower
M6x19
Head Cap Bolt
Spring Washer
14 pcs. (+1 extra)
12 pcs. (+1 extra )
M6x45
Flat Washer
Tapered Head Cap Bolt
12 pcs. (+1 extra )
4 pcs. (+1 extra)
B.
Rail
4 pcs.
F.
Side Frame
2 pcs.
M4x32
Wood Screw (long)
16 pcs. (+1 extra)
M4x12
Wood Screw (short)
12 pcs. (+1 extra)
888-680-7460, 877-831-0319
C.
Side Frame
2 pcs.
G.
Back Frame
1 pc.
M6x45
Headless Bolt
2 pcs. (+1 extra)
Bracket
2 pcs.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Home Styles 5050-13
Summary of Contents for Home Styles 5050-13
- Page 1 2 pcs. 12 pcs. (+1 extra ) 4 pcs. (+1 extra) 12 pcs. (+1 extra) 1 pc. Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
- Page 2 Assembly Instructions 2/5 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Do not tighten all the bolts until each part is properly assembled. Ÿ The unit must be level to work properly.
- Page 3 Assembly Instructions 3/5 STEP 4 Drawer Stop Remove drawer from Cabinet (A). Rotate drawer stop into position. (See Figure 2) Wood Screw (long) Figure 2 STEP 5 Place Cabinet (A) upside down on a soft cloth. Attach unit to Cabinet (A) with Flat Washers, Head Cap Bolt Spring Washer Spring Washers and Head Cap Bolts.
- Page 4 Assembly Instructions 4/5 STEP 7 Attach Side Frame (F) and Shelves (E) to Back Frame (G) with Tapered Head Cap Bolts and Wood Screws (short). Wood Screw (short) Wood Screw (short) Tapered Head Cap Bolt STEP 8 Headless Bolt Attach Side Frame (F) to unit Tapered Head Cap Bolt with Tapered Head Cap Bolts and Wood Screws (short).
- Page 5 Assembly Instructions 5/5 IMPORTANT Ÿ To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly. STEP 10 Anchor in wall Wall Screw Pre-drilled hole Bracket on wall at top of unit Place unit at desired location.
- Page 6 Buff with a dry clean cloth. Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retail affiliate, Home Styles is under no obligation to provide replacement parts.
Need help?
Do you have a question about the 5050-13 and is the answer not in the manual?
Questions and answers