Using The Computer; Power Cord; Signal Cable - LG W1943SE-PF User Manual

Connecting the Display

Using the Computer

1.
Make sure to turn off the computer and product. Connect the cable as below sketch map
form to
1
A
Connect D-sub Cable (PC)
B
Connect D-sub Cable (Mac)
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance
for the product.

Power Cord

2.
Press button on the front switch panel to turn the
power on. When monitor power is turned on, the
'Self Image Setting Function' is executed automatically.
NOTE
' Self Image Setting Function'? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals.
'AUTO/SET' Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted
screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve
resolution.
.
2
Wall-outlet type
Or
Wall-outlet type

Signal Cable

Varies according to model.
For Apple Macintosh use, a separate plug adapter is
needed to change the 15 pin high density (3 row) D-
sub VGA connector on the supplied cable to a 15 pin 2
A7
Mac adapter
row connector.