Download  Print this page

Load Paper - Canon FAXPHONE L80 Setup Instructions

Canon fax phone set-up instructions
Hide thumbs
   

Advertisement

Load paper.

1 Insert a stack of paper into the multi-purpose tray
edge first), then adjust the paper width guides to the width of the paper
2 Attach the multi-purpose tray cover to prevent dust accumulating inside the machine.
Paper width guide
Attach the handset cradle to the machine.
1 Insert the plugs with pins into the holes on the handset cradle.
Plug with pin
2 Turn the machine so that the left side is facing you.
3 Insert the plugs (with the handset cradle) into the holes on the machine.
4 Carefully push the pins into the plugs as far as they will go.
NOTE
• If the pins are not pushed fully into the plugs, the handset cradle will not be securely attached to the
machine.
(print side facing you and top
NOTE
• Do not push the pins all the way into the plugs at this stage.
.
Multi-purpose
tray cover

Advertisement

Table of Contents
loading

This manual is also suitable for:

Faxphone l80 set-up9192a006 - faxphone l80 b/w laser9192a006aa - faxphone l80 b/w laser