Mounting On A Wall - LG E2051S-BN Owner's Manual

8
ASSEMBLING AND PREPARING
WARnInG
When you adjust the angle, do not hold the
bottom of the Monitor set frame as shown on
the following illustration, as it may injure your
fingers.
Do not touch or press the screen when
adjusting the angle of the monitor.
note
Tilt from +15 to -5 degrees up or down to adjust
the angle of the Monitor set to suit your view.
- 5
Front
Using the Kensington security system
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
15
Rear
manual supplied with the Kensington security
system or visit http://www.kensington.com .
Connect the Kensington security system cable
between the Monitor set and a table.
note
The Kensington security system is optional.
You can obtain it from most electronics stores.

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm
on each side and from the wall. Detailed
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
10 cm
10 cm
10 cm
10 cm