Canon imageRUNNER C2550 Network Manual page 36

2
2
2-10
Interface Settings
On the Network Settings screen, press [Ethernet Driver
Settings] ➞ specify the following.
● If you want the machine to automatically determine the
communication mode and Ethernet type:
❑
<Auto Detect>: [On]
If you reconnect the network cable (for example, reconnect the cable to a
different Ethernet hub) with the machine's main power switch ON, the Auto
Detect function will not work even if you set <Auto Detect> to [On]. Turn OFF
the machine, wait at least 10 seconds, and then turn it ON. (Connect the cable
with the machine's main power switch OFF.)
IMPORTANT
The machine automatically determines the Ethernet type. Press [On] unless you
want to specify a particular Ethernet setting.
● If you want to manually set the communication mode and Ethernet
type for specifying a particular Ethernet type setting:
❑
<Auto Detect>: [Off].
Select the appropriate items for <Communication Mode> and <Ethernet
Type>, according to the network environment you are using.