Advertisement
Mobile: Sky and Sea -Assembly Instructions-
Cut out the parts roughly,
and use a ruler and exhausted pen
to score along the lines.
Add a curve.
Put glue on the glue spots and fins indicated
and attach the left and right sides together.
Reverse side
Turn over and curve.
Cut a slot.
Make a valley fold.
Add glue
Fold about 40cm of string in half and align the ends,
then make a knot about 1cm from the end.
Thread the ends through the loop as shown by the arrow.
Put glue on the back of the
lower half of the eye too.
Advertisement
