Additional Information; Troubleshooting; Specifications - Sony RM-PG411 Primary Operating Instructions Manual

Additional Information

Troubleshooting

If you experience any of the following
difficulties while using the receiver, use this
troubleshooting guide to help you remedy the
problem. Should any problem persist, consult
your nearest Sony dealer.
The remote does not function.
• The MPX/DUAL and 12 buttons are not
available.
• Check that the mode of the remote corresponds
to that of the receiver (page 10).
• Point the remote at the remote sensor
receiver.
• Remove any obstacles in the path between the
remote and the receiver.
• Replace both batteries in the remote with new
ones, if they are weak.
• Make sure you select the correct function on the
remote.
• Press MAIN MENU before you use the V/v/B/
b/ENTER/EXECUTE button for receiver
operation (page 5).
Sony Corporation
GB
16
on the
Printed in Malaysia

Specifications

General
Remote control system
Power requirements
Dimensions
Mass (approx.)
Design and specifications are subject to change
without notice.
Infrared control
3 V DC with two R6
(size-AA) batteries
210 x 49 x 25 mm
85 g excluding batteries