Self-Diagnosis Function; Specifications - Sony CPD-G420 Operating Instructions (primary manual) Operating Instructions Manual

Color computer display
Hide thumbs Also See for CPD-G420 Operating Instructions (primary manual):
Table of Contents

Advertisement

Available languages

Available languages

Self-diagnosis function

This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer(s), the screen will go
blank and the ! (power) indicator will either light up green or
flash orange. If the ! (power) indicator is lit in orange, the
computer is in power saving mode. Try pressing any key on the
keyboard or moving the mouse.
INPUT
PICTURE EFFECT
MENU
1
2
OK
! (power) indicator
x x x x If the ! (power) indicator is green
1
Disconnect any plugs from the video input 1 and 2
connectors, or turn off the connected computer(s).
Press the ! (power) button twice to turn the monitor
2
off and then on.
3
Hold the control button upward for 2 seconds
before the monitor enters power saving mode.
OK
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cables and check
the condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure.
Inform your authorized Sony dealer of the monitor’s condition.
x x x x If the ! (power) indicator is flashing orange
Press the ! (power) button twice to turn the monitor off
and then on.
If the ! (power) indicator lights up green, the monitor is working
properly.
If the ! (power) indicator is still flashing, there is a potential
monitor failure. Count the number of seconds between orange
flashes of the ! (power) indicator and inform your authorized
Sony dealer of the monitor’s condition. Be sure to note the model
name and serial number of your monitor. Also note the make and
model of your computer and graphic board.

Specifications

CPD-G520
CRT
0.24 mm aperture grille pitch
21 inches measured diagonally
90-degree deflection
FD Trinitron
Approx. 403.8 × 302.2 mm (w/h)
Viewable image size
(16 × 12 inches)
19.8" viewing image
Resolution
Maximum
Horizontal: 2048 dots
Vertical: 1536 lines
Recommended
Horizontal: 1600 dots
Vertical: 1200 lines
Input signal levels
Video signal
Analog RGB: 0.700 Vp-p
(positive), 75 Ω
SYNC signal
H/V separate or composite sync:
TTL 2 kΩ, Polarity free
Sync on Green: 0.3 Vp-p
(negative)
Approx. 388 × 291 mm (w/h)
Standard image area
× 11
3
1
(15
/
/
inches)
8
2
or
Approx. 364 × 291 mm (w/h)
× 11
3
1
(14
/
/
inches)
8
2
Deflection frequency*
Horizontal: 30 to 130 kHz
Vertical: 48 to 170 Hz
AC input voltage/current 100 to 240 V, 50 – 60 Hz, 2.0 – 1.0 A
Power consumption
Approx. 135 W (with no USB devices
connected)
Approx. 497 × 502 × 485 mm (w/h/d)
Dimensions
× 19 × 18
5
7
(19
/
/
inches)
8
8
Mass
Approx. 30 kg (66 lb 2 oz)
Plug and Play
DDC2B/DDC2Bi, GTF**
Supplied accessories
See page 6
Page 22

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cpd-g520Trinitron cpd-g520

Table of Contents