Tamson Instruments b.v. or authorized persons only. This warranty is limited to one year from the date of invoicing. All equipment and materials are subject to standard production tolerances and variations.
INSTALLATION 4.1 Important Tamson Instruments b.v. is not responsible for any consequential damage or harm caused by using this bath. Repairs on the electrical system of the bath may only be carried out by well trained and authorized persons. 4.2 Unpacking Before leaving the factory Tamson baths are adequately packed to prevent damage during normal transportation.
Small and compact continuous cooling circulator. Ultra low noise operation. 4.5 Connecting Before plugging TV2500 into the mains socket, make CHECK VOLTAGE sure the voltage of the bath corresponds to the local voltage. Use a mains supply that is well earthed, clean of interference and suitable for the acquired electrical load of the bath.
High viscosity will activate the motor fuse. Electrical defect Motor capacitor defective, replace capacitor or contact local dealer or Tamson instruments b.v. 9.3 Problems with set point Heater LED is not burning, motor is turning and temperature rises above set point.
The equipment conforms with all the specifications and norms in this regard. The equipment conforms without any further notice. Entity responsible for marking this declaration : Manufacturer, Tamson Instruments bv, van 't Hoffstraat 12, Bleiswijk The Netherlands, Name R.C. van Hall...
Need help?
Do you have a question about the TV2500 and is the answer not in the manual?
Questions and answers